|
Align GP780
- Brand new intelligent control logic
providing dynamic gain adjustment by detecting current flying conditions,
allowing for consistent pirouetting rates during chaos or other demanding 3D
maneuvers.
- Utilizes feed forward control logic to boost rudder
starting speed, and increase response sensitivity.
- Utilizes Silicon
Micro Machines (SMM) sensor with excellent stability to dramatically reduce
in-flight tail drifts.
- Utilizes AHTCS (Active Helicopter Tail Control
System) to compensate any drift caused by wind direction and force, as well as
unintended yaw induced by helicopter itself during flight
maneuvers.
- Tailor made specifically for use with high speed digital
rudder servos. This gyro festures high sensitivity and minimal reaction time,
fully utilizing the potential of modern high speed digital rudder
servos.
- Suitable for all sizes of helicopters, from micro indoor to
large 90 size glow helicopters.
- Metallic dampening plate built into
bottom gyro casing, dramatically increasing anti-vibration and anti-interference
abilities.
- Features 1520µs pulse wide and 760µs narrow pulse wide frame
rate.
- Digital/Analog servo switchable.
- Reverse
switch.
- Rudder servo travel limit adjustment (ATV).
- Mode
switch for large/mini helicopter.
- Delay adjustment.
- Gyro
locking mode and gain can be adjusted remotely from the
transmitter.
1.Mini/Micro heli mode, suitable for T-REX250/450
(STATUS Red); Medium/large heli mode, suitable for T-REX500/600/700 (STATUS
Green)
2.There are 3 kinds of 760µs narrow pulse wide servos on the market,
including Futaba S9251, S9256, BLS251.
- Operating Voltage:DC
4.5~7V
- Current Consumption:<80mA @ 4.8V
- Angular Detection
Speed:500 degrees/sec
- Operating Humidity:0°C~65°C
- RoHS
certification.
- Operating
Humidity:0%~95%
- Size:26x25x11mm
- Weight:14g
DS650
- Ultra-speed
servo for instant tail control reaction(0.048sec/60 deg).
- 12 Bits 4096
signal resolution for smooth movements.
- Ultra Performance Coreless
Motor with fast reaction and low current.
- Hardened high strength
superalloy gears that increase the lifetime.
- Aluminum alloy mid case
construction for instantaneous heat dissipation, maintaining servos high
efficiency.
- Supports digital & analog control
signal.
- Powerful and precise servo, suitable for T-Rex 600/700 rudder
use.
- Stall torque: 4.0kg.cm (4.8V) / 5.0kg.cm
(6.0V)
- Motion speed: 0.058sec/60° (4.8V) / 0.048sec/60°
(6.0V)
- Rating voltage: DC 4.8-6V
- Temperature range:
-20°C~+60°C
- Dimension: 40.3x20.1x36mm
- Weight: 56g
-
1520µs standard band
|
